Tile leveling System Packets Red - ONLY Wedge (100 Pcs)

The Clip & Wedge Tile Levelling System is a tool for ensuring that all your tiles are perfectly level with one another, virtually identical to the Raimondi Tile Levelling System.

The Clip & Wedge Tile Levelling System is comprised of a thin plastic clip that is designed to be fitted in a grout joint between two tiles. A plastic wedge is then driven by a pair of specially designed pliers into the aperture in the centre of the clip until it sits flush on the surface of both tiles, so that they are both level. Once the tiles have set, the clip is easily broken off, leaving only its base bedded in the adhesive under the two tiles. The plastic wedge and pliers is fully re-useable, which saves costs on further jobs, as you only need to buy clips.

How to use the Clip & Wedge Tile Levelling System:

• After having spread the adhesive, insert the clip underneath the tiles and along the 4 sides.
• According to the tile size, set one or more clips on every side of the tile.
• Set the tile and beat it with a rubber mallet.
• Insert the wedge in the clip slot, paying attention not to pass the breakpoint.
• To facilitate this operation, the use of the traction-adjustable pliers is recommended.
• Once the adhesive is set, the protruding part of the support has to be separated from the base, which is embedded beneath the tile edge. This can be done using a rubber mallet or even feet. Beat parallel to the joint.